Nanomouldrelease is formulated with highly refined methods incorporating the use of nanotechnology.
Its system of delivery and the coating bears the testimony of how far technology has taken us today.
At between 100nm (nanometer) in thickness, this coating has hydrophobic (water repelling) , anti-stick,and chemical/corrosion resistance with low coefficient of friction.
It reduce surface tension, translucent, colorless, non toxic & rohs compliance.
Does not trans-migrate to substrate, does not chemically bond with other substances and can be used with ease of application without special macine or devices.
All process is done manually and curing at room temperature.
Nanomouldrelease fills up gap and crevices on the surface with a microscopic mesh like structure that can withstand a very wide range of temperature from-50~450 degree or more with compromising the stablity of the nano-mesh cross linking structure or its adherence to the surface it is applied onto.
Its flexibilities allows it to stretch and contract with the substrate through such ranges of temperature with cracking or peeling.
Major benifits for moulding industry:
A) increase productivity 10-20% more, parts not sticking during molding
B) enhance the flow of resins in mould due to its low coefficient of friction.
C) part release quicker.
D) reduction in moulding pressure
E) reduction in part weight as resin is not packed as tight
F) eliminating the use of mold release agents.
G) will not trans-migrate to finished parts prior to printing.
H) can be applied to metal on metal parts (ejector pin) to reduce wear and seizing.
I) can be applied over the whole mold, as protection against corrosion.
J) can be applied over polish or coated surface (tin coat)
K) maintain dimensional integrity of mould
L) resists carbon build up from burnt deposit.
Nanomouldrelease coating can last up from 5000 ~100,000 cycles or more depending on design and resin used.
Helps reducing cycle times and facilitates release even used with highly abrasives resin.

Properties:
A) withstand temperature of between-50~450degree
B) water repellent, hydrophobic yet vapor permeable.
C) transparent, 100nm in thickness of coating
D) anti-stick, low coefficient of friction
E) perfect protection against corrosion, test in salt-spray cabinate astm b117 SS=1700hrs
F) withstand most mild acids and many chemical
G) the coating was tested and showed all the content to be non-toxic & rohs compliance
H) easy to clean